Showing posts with label cars. Show all posts
Showing posts with label cars. Show all posts

Wednesday, 23 May 2012

More letterpress!

Put a final colour on my car postcards.......


Then had a go at mixing some type and colours for some simple Father's Day cards - although they could be for a birthday.

The lead type is easy to print and you do get what some people love about letterpress - the embossed effect but I've heard some people say this is bad practice if you can see the impression on the back of the card!
The wooden type was much harder to print - then I used my Caligo Inks and they printed really well! Still getting some texture but I've got over that as these lovely fonts have so much history and a few dinks is such a lovely characteristic.
So there you go.

I'm loving this - can you tell by the amount I'm waffling on?!

Monday, 21 May 2012

Letterpress keeping me fit!

Been busy with this little red press of mine....I tried printing the cars in one colour and all at same time remember? but it was quite impossible and I really tried - for hours.....
So I didn't become annoyed just determined to work it out and tried to do a multi colour print instead as I hadn't done one before and as long as your registration is spot on - it works well!
Here I've just one colour to go...
I printed that many I don't know how cost effective it will be when I try and sell them but at this stage I'm still learning so it's well worth it....




I picked up a great tip regarding registration when taking part in a screenprinting course at The Bluecoat last year and use the same principle on my press:


  • attach a piece of acetate to the side of the platen - I use masking tape
  • take one print onto the acetate
  • line up your card underneath the acetate and attach the card in place with tape
  • move the acetate out of the way but keep attached
  • take a print and check registration
  • if its okay then now is the time to attach whatever you use to hold your cards in place - gauge pins, gripper arm etc I use pieces of card or paper as I don't have these :-( but it works fine for me..
  • Then print away!


I might take a picture of each step and add later....

Sunday, 13 May 2012

Cool Cars

Back to my lovely press and busy making work for a craft fair coming up next month. Started printing my collection of vintage blocks of vehicles yesterday. I'm hoping to create postcards, greetings cards and other bits with the cars theme.....


Printing the collection in one go is a lot more difficult as it takes a little bit of adjustment here and there. Achieving a good print I've found, involves a few considerations...
  • choice of paper
  • amount of ink
  • amount of pressure applied
  • a soft or hard bed (the 'bed' or base of the press that is!)
  • and condition or type of block.

Here there are a mixture of printing blocks with lines and some with a half tone effect. But I'm really enjoying the process of trial and error and when you finally get it right (after a couple of hours and LOTS of scrap paper!) - it's a joy to run off a couple of hundred prints!
It's the setting up and experimentation that takes the longest!


I didn't get round to making a final print as I'd been busy all day and the ink had started to get tacky. So cleaned up and will start again tomorrow - can't wait!

LinkWithin

Related Posts Plugin for WordPress, Blogger...